Rent Tilta Nucleus Nano
The Tilta Nucleus Nano is a compact wireless follow focus system operating on 2.4GHz, designed for gimbal and lightweight camera setups.
Production-ready
All equipment is carefully tested by our technicians before being handed off to you.
Nothing left behind
Time to wrap? Check items off in your Renter Dashboard and see exactly where everything goes.
24 hour review
A rental specialist will review your request and follow up within 24 hours.
Delivery made simple
Convenient delivery coordinated around your production.

Overview
The Tilta Nucleus Nano is a compact wireless follow focus system operating on 2.4GHz, designed for gimbal and lightweight camera setups. It includes a single motor rated at 0.65Nm of torque, capable of driving most still and lightweight cine lenses via 0.8 MOD gearing. The system has a wireless range of up to 90 meters (300 feet) with minimal latency, and can be powered via USB-C (5V–18V) or D-Tap depending on the rig configuration.
Wireless lens control
Remote focus for gimbals and lightweight rigs
0.8 MOD drive gear
Engages common cine gears and included lens rings
Auto or manual calibration
Supports cine hard stops and still-lens A/B limits
Compact 15 mm motor mount
Adds focus control without a full studio system
- System type
- Wireless single-channel lens control
- Radio band
- 2.4 GHz
- Motor gear
- 0.8 MOD
- Motor torque
- Approximately 0.65 Nm
- Range
- Up to approximately 90 m / 300 ft line of sight
- Calibration
- Automatic hard-stop or manual A/B limits
- Motor mounting
- 15 mm rod
- Power
- USB-based motor power or compatible D-Tap cable
- Lens support
- Cine gears or supplied still-lens gear rings
Both Nucleus Nanos give you wireless focus on a light rig. The original Nano keeps it simple — one wheel, one motor — and with two kits in stock it’s the lean choice for still and mirrorless glass or a matched pair of cameras.
| Specification | Tilta Nucleus Nano | Tilta Nucleus Nano II |
|---|---|---|
| Hand unit | Compact knob-style wheel, no screen | 1.6" touchscreen with live FIZ readout |
| Motor torque | Baseline · suited to light still and mirrorless lenses | Approx. 5× the original · auto-adjusting |
| Motor channels | Single motor | Up to 4 (focus, iris, zoom + 1) |
| Camera control | Lens control only | Run/Stop and settings on supported bodies |
| Motor gear | 0.8 MOD | 0.8 MOD |
| Mounting | 15 mm rod clamp | 15 mm rod clamp |
| Range | Up to approx. 300 ft / 90 m | Up to approx. 300 ft / 91 m |
| Motor power | External USB power | USB-C in and out · daisy-chain motors |
| Calibration | Auto or manual A/B limits | Auto or manual · A/B marks on screen |
Best for
Choose the Tilta Nucleus Nano for
- Light still and mirrorless lenses on a gimbal or handheld rig
- Simple single-axis focus pulls on a lean budget
- Two-camera shoots that need a matching pair of focus kits
- Operators who want a wheel and nothing else to manage
Choose the Tilta Nucleus Nano II for
- Cine primes and zooms with stiffer, longer-throw focus rings
- An off-board 1st AC pulling to marks from a wireless monitor
- Focus, iris and zoom from one hand unit as the kit grows
- Rolling and cutting from the hand wheel on gimbal and remote-head shots
- Power the Nano motor adequately and align its gear squarely with the lens - firm engagement without side-loading the barrel.
- Use auto calibration only on lenses with hard end stops; set manual A/B limits for continuously rotating still lenses.
- Mark focus distances after calibration and rehearse the full pull while watching for cable snags and motor slip.
- Recalibrate after changing a lens, gear position, motor tension, or power source.
Need help building a package? Talk to a specialist →